LTS Connect HelpcentrumGetting Started
How to check the components, install the HDD for each chassis form factor (Smart 1U, E Model, MINI 1U and Compact 1U, Cooper 1U, 1U, 1.5U, and 2U), and mount the DVR into a rack.
Checking the Components
The actual appearance, component, or quantity might be different depending on the model you purchased.
When you receive the Device, please check against the following checking list. If any of the items are missing or damaged, contact the local retailer or after-sales engineer immediately.
| Sequence | Checking items | Requirement | |
|---|---|---|---|
| 1 | Package | Appearance | No obvious damage. |
| Packing materials | No broken or distorted positions that could be caused by hit. Not torn up. | ||
| 2 | Labels | Labels on the device | Do not tear up or throw away the labels; otherwise the warranty services are not ensured. You need to provide the serial number of the product when you call the after-sales service. |
| 3 | Device | Appearance | No obvious damage. |
| Data cables, power cables, fan cables, mainboard | No connection loose. |
Installing HDD
Please check whether the HDD is already installed in the Device when you first time using the Device. It is suggested to use the HDD recommended officially. Do not use the PC HDD.
Shut down the device and then unplug the power cable before you open the case to replace the HDD.
Smart 1U
E Model
Installing Battery
The battery is only provided with some models.
Installing HDD
Skip step 6 if the battery is not equipped with the model you purchased.
Connect the battery cable (optional)
(Optional) Pull the battery cable through the hole to connect into the cable port.
MINI 1U and Compact 1U
Fix the screws from the back
Turn the device to see the back side of it. Align the screws of the HDD with the holes on the back of the device, and then fix the screws.
Cooper 1U
Connect the cables to the HDD
Connect HDD cable and power cable to HDD, and fasten the screws in HDD.
1U
Fix the screws from the back
Turn the device to see the back side of it. Align the screws of the HDD with the holes on the back of the device, and then fix the screws.
1.5U
2U
Fix the HDD onto the bracket
Fix the HDD(s) onto the bracket. Remove the top bracket if you want to install HDD to the bottom bracket.
Installing Device into Rack
Only 1.5U and 2U Devices support this installation.
To install the DVR into rack, do the following:
Check temperature and spacing
Check whether the in-house temperature is lower than 35°C (95°F) and make sure the 15 cm (6 inches) spacing around the Device for ventilation.
Fix the DVR
Use six screws to fix the DVR on each side.
Install from the bottom up
Install from the bottom up.
Install accessories (optional)
(Optional) Install more accessories to the rack if needed.
If you want to install more accessories to the rack, take preventive measures to avoid power socket overload.
Introduction
Overview and key functions of the LTS Sapphire Series CVI DVR — smart detection, real-time surveillance, IoT management, storage, recording and playback, network operation, and more.
The Grand Tour
A reference tour of the LTS Sapphire Series CVI DVR front and rear panels for every model, plus remote control and mouse operations.