Output and Display

Configure the NVR display effect, channel tour, and customized video split modes from the DISPLAY menu.

You can configure a tour of selected channels to repeat playing videos. The videos display in turn according to the channel group configured in tour settings. The system displays one channel group for a certain period and then automatically changes to the next channel group.

Open the Tour interface

Select Main Menu > DISPLAY > Tour.

The Tour interface is displayed. See Figure 4-248.

Tour interface with screen number, video detection and alarm view, enable tour, interval, window split, and channel group list

On the top right of the live view screen, use the left mouse button or press Shift to switch between the "image switching is allowed" icon and the "image switching is not allowed" icon to turn on/off the tour function.

On the navigation bar, click the enable tour icon to enable the tour and click the disable icon to disable it.

Configure the tour parameters

Configure the settings for the tour parameters. See Table 4-71.

Parameter	Description
Enable	Enable tour function.
Interval (Sec.)	Enter the amount of time that you want each channel group displays on the screen. The value ranges from 5 seconds to 120 seconds, and the default value is 5 seconds.
Video Detect, Alarm	Select the View 1 or View 8 for Motion Detect tour and Alarm Tour (system alarm events).
Window Split	In the Window Split list, select View 1, View 4, View 8, or other modes that are supported by the Device.
Channel Group	Display all channel groups under the current Window Split setting. Add a channel group: Click Add, in the pop-up Add Group channel, select the channels to form a group, and then click Save. Delete a channel group: Select the check box of any channel group, and then click Delete. Edit a channel group: Select the check box of any channel group and then click Modify, or double-click on the group. The Modify Channel Group dialog box is displayed. You can regroup the channels. Click Move up or Move down to adjust the position of channel group.

Apply

Click Apply to save the settings.

Customized Display

You can set customized video split mode.

This function is for some series products. Refer to the actual product for detailed information.
Device max. supports 5 customized videos.

Open the Custom Split interface

Select Main Menu > DISPLAY > Custom Split.

The Custom Split interface is displayed. See Figure 4-249.

Figure 4-249 has no screenshot embedded in the source manual; only its caption appears on the page.

Select a basic mode

Click the add icon and then click a split layout icon to select basic mode.

System adopts the basic window mode as the new window name. For example, if you select the 8 display mode, the default name is Split8.

In regular mode, drag the mouse in the preview frame; you can merge several small windows to one window so that you can get you desired split mode. See Figure 4-250.

Custom Split mode-selection grid with split layout icons and an empty name list

After merge the window, system adopts the remaining window amount as the new name such as Split6.
Select the window you want to merge (red highlighted), click the cancel icon to cancel the merge to restore the basic mode.
Click the delete icon to delete the customized window mode.

Apply

Click Apply to exit.

After the setup, you can go to the preview window, right click mouse and then select Custom Split. See Figure 4-251.

Merged Split8 layout with one large window highlighted in orange and smaller surrounding windows

Output and Display

Configure the NVR display effect, channel tour, and customized video split modes from the DISPLAY menu.

Display

You can configure the display effect such as displaying time title and channel title, adjusting image transparency, and selecting the resolution.

Open the Display interface

Select Main Menu > DISPLAY > Display.

The Display interface is displayed. See Figure 4-247.

Display interface showing transparency, time and channel display, resolution, and audio input settings

Configure the display parameters

Configure the settings for the display parameters. See Table 4-70.

Parameter	Description
Transparency	Set the transparency of the local menu of the NVR device. The higher the transparency, the more transparent the local menu.
Time Display/Channel Display	Select the check box and the date and time of the system will be displayed in the preview screen.
Image Enhance	Select the check box to optimize the preview image edges.
IVS Rule	Select the check box to display the IVS rules in the preview interface. This function is for some series products only.
Original Scale	Click Setting and select the channel to restore the corresponding channel image to the original scale.
Main Screen	Select VGA+HDMI1 or HDMI2. Different devices display different contents. See the actual situation.
Screen Enable	Select the check box to enable this screen. The image can only be displayed when the screen is enabled.
Test Temperature	Check the box to test the object temperature, including trace the high/low temperature.
Resolution	Support 1920×1080, 1280×1024 (default), 1280×720.
Screen No.	Enter the screen number you want to set the audio input.
Channel	Select the channel number.
Audio Input	Select from audio 1, audio 2 and mix output.

Apply

Click Apply.

Tour

Open the Tour interface

Select Main Menu > DISPLAY > Tour.

The Tour interface is displayed. See Figure 4-248.

Tour interface with screen number, video detection and alarm view, enable tour, interval, window split, and channel group list

On the navigation bar, click the enable tour icon to enable the tour and click the disable icon to disable it.

Configure the tour parameters

Configure the settings for the tour parameters. See Table 4-71.

Parameter	Description
Enable	Enable tour function.
Interval (Sec.)	Enter the amount of time that you want each channel group displays on the screen. The value ranges from 5 seconds to 120 seconds, and the default value is 5 seconds.
Video Detect, Alarm	Select the View 1 or View 8 for Motion Detect tour and Alarm Tour (system alarm events).
Window Split	In the Window Split list, select View 1, View 4, View 8, or other modes that are supported by the Device.
Channel Group	Display all channel groups under the current Window Split setting. Add a channel group: Click Add, in the pop-up Add Group channel, select the channels to form a group, and then click Save. Delete a channel group: Select the check box of any channel group, and then click Delete. Edit a channel group: Select the check box of any channel group and then click Modify, or double-click on the group. The Modify Channel Group dialog box is displayed. You can regroup the channels. Click Move up or Move down to adjust the position of channel group.

Apply

Click Apply to save the settings.

Customized Display

You can set customized video split mode.

This function is for some series products. Refer to the actual product for detailed information.
Device max. supports 5 customized videos.

Open the Custom Split interface

Select Main Menu > DISPLAY > Custom Split.

The Custom Split interface is displayed. See Figure 4-249.

Figure 4-249 has no screenshot embedded in the source manual; only its caption appears on the page.

Select a basic mode

Click the add icon and then click a split layout icon to select basic mode.

System adopts the basic window mode as the new window name. For example, if you select the 8 display mode, the default name is Split8.

In regular mode, drag the mouse in the preview frame; you can merge several small windows to one window so that you can get you desired split mode. See Figure 4-250.

Custom Split mode-selection grid with split layout icons and an empty name list

After merge the window, system adopts the remaining window amount as the new name such as Split6.
Select the window you want to merge (red highlighted), click the cancel icon to cancel the merge to restore the basic mode.
Click the delete icon to delete the customized window mode.

Apply

Click Apply to exit.

After the setup, you can go to the preview window, right click mouse and then select Custom Split. See Figure 4-251.

Merged Split8 layout with one large window highlighted in orange and smaller surrounding windows

Output and Display