Statistics

Generate reports for analysis — people counting, intersection analysis, queue management (queuing-up time and queue status) and heat map reports, with daily, weekly, monthly and annual views.

Reports, created for a specified period, are essential documents, which are used to check whether a business runs smoothly and effectively. In this software, reports can be generated daily, weekly, monthly, annually, and by custom time period. You can use reports as basis in creating decisions, addressing problems, checking tendency and comparison, etc.

People Counting Report

People counting statistics is to calculate the number of line crossing people in a specific area and a certain time period by the people counting camera(s), which can help the storekeeper to analyze the customers flow and number in different time, and the storekeeper can flexibly do some business adjustment according to the report. You can view the people counting statistics in a line chart or histogram, and generate reports for exporting the detailed data to local storage.

Before You Start

Add a people counting device to the software and properly configure the corresponding area. The added device should have been configured with people counting rule. Refer to Add Device for details about adding people counting device.

Steps

Click Report → People Counting to enter People Counting page.
Select daily report, weekly report, monthly report, or annual report as the report type.
- Daily Report — Daily report shows data on a daily basis. The system will calculate the number of people in a each hour of one day.
- Weekly Report, Monthly Report and Annual Report — As compared to daily report, weekly report, monthly report and annual report can be less-time consuming, since they are not to be submitted every day. The system will calculate the number of people in each day of one week, in each day of one month, in each month of one year.
Select the statistics time type and click to set the time.
- One Period — Generate the statistics in one time period.
- Multiple Periods — Generate the statistics in two time periods, which can help you to compare the people flow and number in two time periods. For example, if you set the report type as month report, and set the March and April as the statistic time, the people counting results in March and April will be displayed in a same chart with different color, and you can compare the data in different day of each month.
On the upper-right corner of the page, select Display by Device or Display by Camera.
- Display by Device — Display the report by device. For example, if you select one NVR (with 4 people counting cameras), the report will display the total number of people summed by the 4 people counting cameras.
- Display by Camera — Display the report by camera. For example, if you select one NVR (with 4 people counting cameras), the report will display the each camera's statistics respectively, namely display the statistics in 4/8 colors (each/2 color represent one camera).
Select the people counting camera(s) to be displayed.
Select the direction for statistics.
- Entered — The people entered will be counted.
- Exited — The people exited will be counted.
- Passed — Both people entered and exited will be counted.
Click Search to get the people counting statistics and detailed data for each hour, day, or month. By default, the statistics are shown in histogram form.
Optional: Perform the following operations after search.
- Switch to Line Chart — Click to switch it to line chart.
  - Note: By default, the statistics are shown in bar chart.
- Switch to Bar Chart — Click to switch it to bar chart.
- Save to Local PC — Click Export to save the detailed data of people counting to your PC.

View People Counting in Intersections Report

Intersection analysis is used to monitor people flow and number in an intersection-like scene. The arrows in the image refer to different directions. By selecting one direction (e.g. A) as the entrance, the other directions will be set as the exits by default, so that multiple paths are generated (e.g., A to A, A to B, A to C, and A to D). You can view the people counting who passed by each path, respectively, which can help the shopkeeper to analyze the people flow in different door. The statistics result can show in daily, weekly, monthly, and annual report.

Before You Start

Make sure a fisheye camera which supports intersection analysis function has been configured properly and be added to the software. Refer to Add Device for details about adding the device.

Steps

Up to 10 intersections can be analyzed.

Click Report → Intersection Analysis to enter the intersection analysis module.
Select daily report, weekly report, monthly report, or annual report as the report type.
- Daily Report — Daily report shows data on a daily basis. The system will calculate the number of people in intersection report in a each hour of one day.
- Weekly Report, Monthly Report and Annual Report — As compared to daily report, weekly report, monthly report and annual report can be less-time consuming, since they are not to be submitted every day. The system will calculate the number of people in intersection report in each day of one week, in each day of one month, in each month of one year.
Set the start time for the report.
Select the camera for generating the report.
Select one direction as the entrance from the drop-down list in the Flow in filed.
Click Search to get the statistics result. The people number for each path will show on the right.

Queue Management

Queue management supports data analysis and report output from multiple dimensions.

Commonly Used Data Analysis

To see queuing-up people number of a certain waiting time level in a queue/region, use queuing-up time analysis, check a target region and set a waiting time level.
To compare queuing-up people number of a certain waiting time level in multiple queues/regions, use queuing-up time analysis, check target regions and set a waiting time level.
To compare queuing-up people number of different waiting time levels in multiple queues/regions, use queuing-up time analysis, check target regions and set waiting time levels.
To see the time and duration that a queue stays a certain length in a queue/region, use queue status analysis, check a target region and set a queue length level.
To compare the time and duration that a queue stays a certain length in multiple queues/regions, use queue status analysis, check target regions and set a queue length level.
To compare the time and duration that a queue stays at different length in multiple queues/regions, use queue status analysis, check target regions and set queue length levels.

Queuing-Up Time Analysis

Queuing-Up Time Analysis calculates people number of different waiting time levels. Regional comparison and multiple waiting time level comparison are supported.

Compare Queuing-up People Amount for Different Regions

You can search the queuing-up people amount for a certain waiting time level, and compare the people amount in different regions, which can help the storekeeper to analyze the customers' interested area (e.g, the regions with larger people amount are more popular than the regions with lower people amount，and you can arrange more goods in these regions.). The statistics data can show in daily report, weekly report, or monthly report.

Before You Start

Add the device to the software and properly configure the corresponding settings. See Add Device for details about adding the device.

Steps

This function should be supported by the connected device.

Click Report → Queue Management to enter the queue management page.
Click Queuing-up Time Analysis Tab.
Select the report type including Daily Report, Weekly Report and Monthly Report.
- Daily Report — Daily report shows data on a daily basis. The system will calculate the people amount for different regions in a each hour of one day.
- Weekly Report, Monthly Report — As compared to daily report, weekly report and monthly report can be less-time consuming, since they are not to be submitted every day. The system will calculate the people amount for different regions in each day of one week, in each day of one month.
Set the statistic time.
Click to unfold the region list and select the region(s).

Up to 6 regions can be selected.
Select Regional Comparison as the report content.
Select a waiting time level and enter the seconds for calculating people amount waiting for the specified time period.
Click Search to generate the statistics result. The line chart of the calculated people amount in the specified waiting time will show on the result area. The lines with different colors indicate the people from the selected regions.
Optional: Click Export to export the data in Excel file.

Compare Queuing-up People Amount for Different Waiting Time Levels

For a certain region, the queuing-up people amount can be calculated according to the waiting time level (e.g. the waiting time is shorter than the specified seconds.). You can search and compare the people amount for the multiple waiting time levels, which can help the customers to analyze the cashier efficiency. The statistics data can show in daily report, weekly report, or monthly report.

Before You Start

Add the device to the software and properly configure the corresponding settings. See Add Device for details about adding the device.

Steps

This function should be supported by the connected device.

Click Report → Queue Management to enter the queue management page.
Click Queuing-up Time Analysis Tab.
Select the report type including Daily Report, Weekly Report and Monthly Report.
- Daily Report — Daily report shows data on a daily basis. The system will calculate the queuing-up people amount for different waiting time levels in a each hour of one day.
- Weekly Report, Monthly Report — As compared to daily report, weekly report and monthly report can be less-time consuming, since they are not to be submitted every day. The system will calculate the queuing-up people amount for different waiting time levels in each day of one week, in each day of one month.
Set the statistic time.
Click to unfold the region list and select the region(s).
Select Multi-level Comparison as the report content.
Select the waiting time level and enter the seconds for calculating people amount waiting for the specified time period.
Click Search to generate the statistics result. The line chart of the calculated people amount in the same region will show on the result area. The lines with different colors match the waiting time levels.
Optional: Click Export to export the data in Excel file.

Queue Status Analysis

Queue Status Analysis calculates the time and duration that a queue stays with a certain length. Regional comparison and multiple queue length level comparison are supported.

Compare Queuing-up Duration for Different Regions

When the queue stays at a certain length, you can search and compare the durations in different regions, which can help the customers to analyze the cashier efficiency for different regions (e.g., the region with the shorter queuing-up duration has the higher efficiency than the region with the longer queuing-up duration). The statistics data can show in daily report, weekly report or monthly report.

Before You Start

Add the device to the software and properly configure the corresponding settings. See Add Device for details about adding the device.

Steps

This function should be supported by the connected device.

Click Report → Queue Management.
Click Status Analysis Tab.
Select the report type including Daily Report, Weekly Report and Monthly Report.
- Daily Report — Daily report shows data on a daily basis. The system will calculate the queuing-up duration for different regions in a each hour of one day.
- Weekly Report, Monthly Report — As compared to daily report, weekly report and monthly report can be less-time consuming, since they are not to be submitted every day. The system will calculate the queuing-up duration for different regions in each day of one week, in each day of one month.
Set the statistic time.
Click to unfold the region list and select the region(s).
Select Regional Comparison as the statistics type.
Select a queue length level and enter the value for calculating duration when the queue stays at the length.
Click Search to generate the statistics result. The line chart of the calculated duration for staying the specified queue length will show on the result area. The lines with different colors match the selected regions.
Optional: Click Export to export the data in Excel file.

Compare Queuing-up Duration for Different Queue Length Levels

For the queue in a certain region, you can search the duration when a queue stays a certain length and compare the durations for different queue length levels, which can help the customers to analyze the cashier efficiency of different queue length levels. The statistics data can show in daily report, weekly report, or monthly report.

Before You Start

Add the device to the software and properly configure the corresponding settings. See Add Device for details about adding the device.

Steps

This function should be supported by the connected device.

Click Report → Queue Management.
Click Status Analysis Tab.
Select the report type including Daily Report, Weekly Report and Monthly Report.
- Daily Report — Daily report shows data on a daily basis. The system will calculate the queuing-up duration for different queue length levels in a each hour of one day.
- Weekly Report, Monthly Report — As compared to daily report, weekly report and monthly report can be less-time consuming, since they are not to be submitted every day. The system will calculate the queuing-up duration for different queue length levels in each day of one week, in each day of one month.
Set the statistic time.
Click to unfold the region list and select the region(s).
Select Multi-level Comparison as the report content.
Select the queue length level and enter the value for calculating duration when the queue stays at the length.
Click Search to generate the statistics result. The line chart of the calculated duration in the same region will show on the result area. The lines with different colors match the queue length levels.
Optional: Click Export to export the data in Excel file.

Heat Map Report

Heat map is a graphical representation of data represented by colors and the heat map data can be displayed in line chart. You can use the heat map function of the camera to analyze the visit times and dwell time of customers in a configured area, which can help the storekeeper analyze the customers' interested area and make the arrangement of goods.

Before You Start

Add a heat map network camera to the software and properly configure the corresponding area. The added camera should have been configured with heat map rule. See Add Device for details about adding heat map network camera.

Steps

Click Report → Heat Map to enter the heat map page.
Select daily report, weekly report, monthly report, or annual report as the time type for the report.
- Daily Report — Daily report shows data on a daily basis. The system will calculate the data of heat map in a each hour of one day.
- Weekly Report, Monthly Report and Annual Report — As compared to daily report, weekly report, monthly report and annual report can be less-time consuming, since they are not to be submitted every day. The system will calculate the data of heat map in each day of one week, in each day of one month, in each month of one year.
Select By Dwell Time or By People Number as the statistics type.
- By Dwell Time — The system calculates the heat map value (the ordinate value in the line chart or the color in pictures) according to the people's dwell time.
- By People Number — The system calculates the heat map value (the ordinate value in the line chart or the color in pictures) according to the people number.
Set the start time.
Select a heat map camera in the camera list.
Click Generate Heat Map to show the heat map of the camera.
Optional: After generating heat map report, you can perform the following operations.
- Display in Line Chart — Click to display the statistics in line chart.
- Display in Picture Mode — Click to display the statistics in picture mode. The red color block (255, 0, 0) indicates the most welcome area, and blue color block (0, 0, 255) indicates the less-popular area.
- Save Statistics Data — Click Export to save the detailed data of heat map to your PC.

People Counting Report

Before You Start

Steps

Click Report → People Counting to enter People Counting page.
Select daily report, weekly report, monthly report, or annual report as the report type.
- Daily Report — Daily report shows data on a daily basis. The system will calculate the number of people in a each hour of one day.
- Weekly Report, Monthly Report and Annual Report — As compared to daily report, weekly report, monthly report and annual report can be less-time consuming, since they are not to be submitted every day. The system will calculate the number of people in each day of one week, in each day of one month, in each month of one year.
Select the statistics time type and click to set the time.
- One Period — Generate the statistics in one time period.
- Multiple Periods — Generate the statistics in two time periods, which can help you to compare the people flow and number in two time periods. For example, if you set the report type as month report, and set the March and April as the statistic time, the people counting results in March and April will be displayed in a same chart with different color, and you can compare the data in different day of each month.
On the upper-right corner of the page, select Display by Device or Display by Camera.
- Display by Device — Display the report by device. For example, if you select one NVR (with 4 people counting cameras), the report will display the total number of people summed by the 4 people counting cameras.
- Display by Camera — Display the report by camera. For example, if you select one NVR (with 4 people counting cameras), the report will display the each camera's statistics respectively, namely display the statistics in 4/8 colors (each/2 color represent one camera).
Select the people counting camera(s) to be displayed.
Select the direction for statistics.
- Entered — The people entered will be counted.
- Exited — The people exited will be counted.
- Passed — Both people entered and exited will be counted.
Click Search to get the people counting statistics and detailed data for each hour, day, or month. By default, the statistics are shown in histogram form.
Optional: Perform the following operations after search.
- Switch to Line Chart — Click to switch it to line chart.
  - Note: By default, the statistics are shown in bar chart.
- Switch to Bar Chart — Click to switch it to bar chart.
- Save to Local PC — Click Export to save the detailed data of people counting to your PC.

View People Counting in Intersections Report

Before You Start

Make sure a fisheye camera which supports intersection analysis function has been configured properly and be added to the software. Refer to Add Device for details about adding the device.

Steps

Up to 10 intersections can be analyzed.

Click Report → Intersection Analysis to enter the intersection analysis module.
Select daily report, weekly report, monthly report, or annual report as the report type.
- Daily Report — Daily report shows data on a daily basis. The system will calculate the number of people in intersection report in a each hour of one day.
- Weekly Report, Monthly Report and Annual Report — As compared to daily report, weekly report, monthly report and annual report can be less-time consuming, since they are not to be submitted every day. The system will calculate the number of people in intersection report in each day of one week, in each day of one month, in each month of one year.
Set the start time for the report.
Select the camera for generating the report.
Select one direction as the entrance from the drop-down list in the Flow in filed.
Click Search to get the statistics result. The people number for each path will show on the right.

Queue Management

Queue management supports data analysis and report output from multiple dimensions.

Commonly Used Data Analysis

To see queuing-up people number of a certain waiting time level in a queue/region, use queuing-up time analysis, check a target region and set a waiting time level.
To compare queuing-up people number of a certain waiting time level in multiple queues/regions, use queuing-up time analysis, check target regions and set a waiting time level.
To compare queuing-up people number of different waiting time levels in multiple queues/regions, use queuing-up time analysis, check target regions and set waiting time levels.
To see the time and duration that a queue stays a certain length in a queue/region, use queue status analysis, check a target region and set a queue length level.
To compare the time and duration that a queue stays a certain length in multiple queues/regions, use queue status analysis, check target regions and set a queue length level.
To compare the time and duration that a queue stays at different length in multiple queues/regions, use queue status analysis, check target regions and set queue length levels.

Queuing-Up Time Analysis

Queuing-Up Time Analysis calculates people number of different waiting time levels. Regional comparison and multiple waiting time level comparison are supported.

Compare Queuing-up People Amount for Different Regions

Before You Start

Add the device to the software and properly configure the corresponding settings. See Add Device for details about adding the device.

Steps

This function should be supported by the connected device.

Click Report → Queue Management to enter the queue management page.
Click Queuing-up Time Analysis Tab.
Select the report type including Daily Report, Weekly Report and Monthly Report.
- Daily Report — Daily report shows data on a daily basis. The system will calculate the people amount for different regions in a each hour of one day.
- Weekly Report, Monthly Report — As compared to daily report, weekly report and monthly report can be less-time consuming, since they are not to be submitted every day. The system will calculate the people amount for different regions in each day of one week, in each day of one month.
Set the statistic time.
Click to unfold the region list and select the region(s).

Up to 6 regions can be selected.
Select Regional Comparison as the report content.
Select a waiting time level and enter the seconds for calculating people amount waiting for the specified time period.
Click Search to generate the statistics result. The line chart of the calculated people amount in the specified waiting time will show on the result area. The lines with different colors indicate the people from the selected regions.
Optional: Click Export to export the data in Excel file.

Compare Queuing-up People Amount for Different Waiting Time Levels

Before You Start

Add the device to the software and properly configure the corresponding settings. See Add Device for details about adding the device.

Steps

This function should be supported by the connected device.

Click Report → Queue Management to enter the queue management page.
Click Queuing-up Time Analysis Tab.
Select the report type including Daily Report, Weekly Report and Monthly Report.
- Daily Report — Daily report shows data on a daily basis. The system will calculate the queuing-up people amount for different waiting time levels in a each hour of one day.
- Weekly Report, Monthly Report — As compared to daily report, weekly report and monthly report can be less-time consuming, since they are not to be submitted every day. The system will calculate the queuing-up people amount for different waiting time levels in each day of one week, in each day of one month.
Set the statistic time.
Click to unfold the region list and select the region(s).
Select Multi-level Comparison as the report content.
Select the waiting time level and enter the seconds for calculating people amount waiting for the specified time period.
Click Search to generate the statistics result. The line chart of the calculated people amount in the same region will show on the result area. The lines with different colors match the waiting time levels.
Optional: Click Export to export the data in Excel file.

Queue Status Analysis

Queue Status Analysis calculates the time and duration that a queue stays with a certain length. Regional comparison and multiple queue length level comparison are supported.

Compare Queuing-up Duration for Different Regions

Before You Start

Add the device to the software and properly configure the corresponding settings. See Add Device for details about adding the device.

Steps

This function should be supported by the connected device.

Click Report → Queue Management.
Click Status Analysis Tab.
Select the report type including Daily Report, Weekly Report and Monthly Report.
- Daily Report — Daily report shows data on a daily basis. The system will calculate the queuing-up duration for different regions in a each hour of one day.
- Weekly Report, Monthly Report — As compared to daily report, weekly report and monthly report can be less-time consuming, since they are not to be submitted every day. The system will calculate the queuing-up duration for different regions in each day of one week, in each day of one month.
Set the statistic time.
Click to unfold the region list and select the region(s).
Select Regional Comparison as the statistics type.
Select a queue length level and enter the value for calculating duration when the queue stays at the length.
Click Search to generate the statistics result. The line chart of the calculated duration for staying the specified queue length will show on the result area. The lines with different colors match the selected regions.
Optional: Click Export to export the data in Excel file.

Compare Queuing-up Duration for Different Queue Length Levels

Before You Start

Add the device to the software and properly configure the corresponding settings. See Add Device for details about adding the device.

Steps

This function should be supported by the connected device.

Click Report → Queue Management.
Click Status Analysis Tab.
Select the report type including Daily Report, Weekly Report and Monthly Report.
- Daily Report — Daily report shows data on a daily basis. The system will calculate the queuing-up duration for different queue length levels in a each hour of one day.
- Weekly Report, Monthly Report — As compared to daily report, weekly report and monthly report can be less-time consuming, since they are not to be submitted every day. The system will calculate the queuing-up duration for different queue length levels in each day of one week, in each day of one month.
Set the statistic time.
Click to unfold the region list and select the region(s).
Select Multi-level Comparison as the report content.
Select the queue length level and enter the value for calculating duration when the queue stays at the length.
Click Search to generate the statistics result. The line chart of the calculated duration in the same region will show on the result area. The lines with different colors match the queue length levels.
Optional: Click Export to export the data in Excel file.

Heat Map Report

Before You Start

Steps

Click Report → Heat Map to enter the heat map page.
Select daily report, weekly report, monthly report, or annual report as the time type for the report.
- Daily Report — Daily report shows data on a daily basis. The system will calculate the data of heat map in a each hour of one day.
- Weekly Report, Monthly Report and Annual Report — As compared to daily report, weekly report, monthly report and annual report can be less-time consuming, since they are not to be submitted every day. The system will calculate the data of heat map in each day of one week, in each day of one month, in each month of one year.
Select By Dwell Time or By People Number as the statistics type.
- By Dwell Time — The system calculates the heat map value (the ordinate value in the line chart or the color in pictures) according to the people's dwell time.
- By People Number — The system calculates the heat map value (the ordinate value in the line chart or the color in pictures) according to the people number.
Set the start time.
Select a heat map camera in the camera list.
Click Generate Heat Map to show the heat map of the camera.
Optional: After generating heat map report, you can perform the following operations.
- Display in Line Chart — Click to display the statistics in line chart.
- Display in Picture Mode — Click to display the statistics in picture mode. The red color block (255, 0, 0) indicates the most welcome area, and blue color block (0, 0, 255) indicates the less-popular area.
- Save Statistics Data — Click Export to save the detailed data of heat map to your PC.

People Counting Report

View People Counting in Intersections Report

Queue Management

Queuing-Up Time Analysis

Compare Queuing-up People Amount for Different Regions

Compare Queuing-up People Amount for Different Waiting Time Levels

Queue Status Analysis

Compare Queuing-up Duration for Different Regions

Compare Queuing-up Duration for Different Queue Length Levels

Heat Map Report

目錄

Statistics

People Counting Report

View People Counting in Intersections Report

Queue Management

Queuing-Up Time Analysis

Compare Queuing-up People Amount for Different Regions

Compare Queuing-up People Amount for Different Waiting Time Levels

Queue Status Analysis

Compare Queuing-up Duration for Different Regions

Compare Queuing-up Duration for Different Queue Length Levels

Heat Map Report

目錄