Configure Video Event | LTS Connect App － LTS 安防攝影機遠端監控

Configure linked actions for video events from cameras, alarm inputs and encoding/decoding devices — enable events, set priority, and edit linkage such as audible warning, email, pop-up, map display and linked capture.

Even if you are far away from the video device (cameras, alarm inputs and encoding devices, decoding devices), you can still know what happens and how urgent the event is by configuring linked actions of video event on the client. You will be notified on the client once an event is triggered, so that you can response to the event instantly. You can also configure client actions of video devices in a batch at a time.

Steps

Click Event Management → Video Event to enter the video event configuration page.
On the left panel, select the event source type: Camera, Alarm Input, or Device, and then select the specific source in the device list.

Make sure the device is online.

All the events supported by the selected device will be displayed.
Optional: Turn on the switch on the Enable column to enable the event, or click Enable All to enable all the events of this device.

After enabled, the event can be received by the software client and trigger the linkage action(s).
Optional: Turn off the switch on the Enable column to disable this event, or Click Disable All to disable all the events of this device.

After disabled, the event received by the software client can not trigger the linkage action(s).
Optional: Select the event(s), and then click Edit Priority to edit the priority of the event(s).

Priority represents the emergency degree of the event.
Select the event(s), and then click Edit Event Linkage to edit the linkage action(s) of the event(s).
- Audible Warning — Trigger the client's audible warning when the event is triggered. You can select the audio file on the drop-down list, or click Add to add new audio file (in WAV format). You can click to make an audition of the selected audio file.
- Send Email — Send an email notification of the alarm information to one or more receivers. For details about setting email parameters, refer to Set Email Parameters.
- Pop-up Window — Pop-up window to display the event related information (including event details, live video of the source camera, captured pictures of the linked camera, process record, and process field) on the software client when the event is triggered.
- Display on Map — When the event source is added as a hot spot on the map, the hot spot will be displayed with a twinkling indicator aside when the event is triggered, which helps to security guard to view the location of the event. You can also click the hot spot to view the event details and the live video of the linked camera.
- Linked Camera — Link the selected camera to capture picture when the event is triggered. Select the camera in the drop-down list.
Optional: Select the event(s), and then click Copy to to copy the event settings of this device to other device(s).

You can only copy the event settings to the device(s) with the same device type.

Configure Video Event

Steps

Click Event Management → Video Event to enter the video event configuration page.
On the left panel, select the event source type: Camera, Alarm Input, or Device, and then select the specific source in the device list.

Make sure the device is online.

All the events supported by the selected device will be displayed.
Optional: Turn on the switch on the Enable column to enable the event, or click Enable All to enable all the events of this device.

After enabled, the event can be received by the software client and trigger the linkage action(s).
Optional: Turn off the switch on the Enable column to disable this event, or Click Disable All to disable all the events of this device.

After disabled, the event received by the software client can not trigger the linkage action(s).
Optional: Select the event(s), and then click Edit Priority to edit the priority of the event(s).

Priority represents the emergency degree of the event.
Select the event(s), and then click Edit Event Linkage to edit the linkage action(s) of the event(s).
- Audible Warning — Trigger the client's audible warning when the event is triggered. You can select the audio file on the drop-down list, or click Add to add new audio file (in WAV format). You can click to make an audition of the selected audio file.
- Send Email — Send an email notification of the alarm information to one or more receivers. For details about setting email parameters, refer to Set Email Parameters.
- Pop-up Window — Pop-up window to display the event related information (including event details, live video of the source camera, captured pictures of the linked camera, process record, and process field) on the software client when the event is triggered.
- Display on Map — When the event source is added as a hot spot on the map, the hot spot will be displayed with a twinkling indicator aside when the event is triggered, which helps to security guard to view the location of the event. You can also click the hot spot to view the event details and the live video of the linked camera.
- Linked Camera — Link the selected camera to capture picture when the event is triggered. Select the camera in the drop-down list.
Optional: Select the event(s), and then click Copy to to copy the event settings of this device to other device(s).

You can only copy the event settings to the device(s) with the same device type.